The riser is the central part of the bow that connects to the limbs and other mechanical components.
Tighten or loosen the limb bolts one full rotation at a time. This will help you keep track of the level of tension in each of the limbs. [3] X Research source On most compound bows, one rotation of the limb bolt translates to roughly a pound and a half of weight. Remember to adjust the tension equally on both limbs.
You should be able to draw the bow in one smooth, controlled motion.
Light draw weights are more manageable, but sacrifice force and velocity when propelling the arrow. [6] X Research source A heavier draw weight doesn’t always equal a better shot. The force and trajectory can depend just as much on the type of arrow you’re using.
The draw length of the bow should correspond directly to your arm span. Altering the bow’s draw length is more complicated, and may have to be done by a professional.
Competition archers shoot more frequently and might get tired using a heavier draw weight. Bows with different specifications and mechanical advantages are made for different kinds of sportsmen.
Always go with what feels best. It may take a little time to figure out, but in the end your bow will be better calibrated to your unique proportions, and you’ll be more accurate as a result.
Try out different bow sizes and draw weights to see which you handle best. These are just average figures, and don’t reflect the abilities of an individual archer.
The point at which the bowstring can’t be pulled back any further is known as the “wall. ” The wall of a draw is calculated to help you find the perfect amount of tension to take a shot. [11] X Research source Drawing and holding is a practical exercise, as you’ll be holding the draw to aim when shooting for real.
This test slightly overestimates the role of the upper body in drawing, holding and shooting, giving you more control when your feet are on the ground.
Your draw should be one fluid movement, and the bowstring should not slow down at any point during the pull.
