Leaving oil or skin care product residue under Plexaderm can make it less effective. It’s a good idea to wash your hands as well, since you’ll be applying the cream with your fingers.
Place the Plexaderm bottle on a flat, level surface and remove the cap. Using your thumb, slowly and firmly push the pump down until it cannot go any further. Continue pushing down the pump until product begins to flow, typically about 10-15 pumps; however, it could take longer so be patient. Once the desired amount of product has been dispensed, replace the cp for safe storage. Do not tamper with the self-sealing valve, as this could damage the pump.
Once the desired amount of product has been dispensed, replace the cap for safe storage. [4] X Research source
If Plexaderm does get in your eyes, rinse your eyes out with cool, clean water.
If you do move your face before the 10 minutes are up and break the bond, you can apply a little bit more and wait another 5 minutes. After the 10 minutes are up, you can move your face again.
Only apply Plexaderm a second time if it’s really necessary—you don’t want to overuse the product on your skin. Overusing Plexaderm could cause your skin to look a bit unnatural, and excess product isn’t good for the health of your skin.
Use moisturizer at night, or at least 20 minutes before applying Plexaderm if you’re using them together. For makeup, try mixing 1/3 liquid foundation or concealer with 2/3 Plexaderm and apply with your fingertip. [7] X Research source Allow the Plexaderm mixture to set for 10 minutes. The ratio of Plexaderm to makeup ratio may vary depending on the brand of makeup.
